Scenario 1: Seeking to turn off power to all devices but one return pump, which is located on the primary energy bar 832
· Have a 12v adaptor connected to system brain. It is plugged into a regular wall outlet.
· Have a CyberPower UPS, which I plan to plug into primary energy bar 832
· Have a eb4 connected to wall and tethered via USB cable to energy bar 832. Don't want battery power to this.
What I need help with configuring, please:
· Cut power to devices that I do not want to use during a power failure. Heater, skimz, chiller, wavs, etc.
· When power is restored (sensing the 12v adaptor, then restore power). For skimmer wait 3 minutes and for chiller wait 5 minutes
If Power Apex Off 000 Then XXX
· Keep power on to SICCE Syncra return pump only, which is hosted on the main 832.
If Power Apex Off 000 Then On
· What about power monitor? Enable or disable?
· Reboot: Enable?
PLEASE HELP ME WITH THE RIGHT COMMANDS. THANK YOU VERY MUCH.
Scenario 2: Add a secondary eb4 and connect the Sicce Syncra return pump to it
· Would this be more energy efficient? And should it be connected to the 832 via USB?
· What would the command be?
Also would like text notification of power failure
PLEASE HELP ME WITH THE RIGHT COMMANDS. THANK YOU VERY MUCH.
Bookmarks