Hi, please can someone help me. I've programmed my Dos, as below, but the Dos doesn't appear to activate the profile at the allotted time!
Program for DŌS Pump 1 on the DŌS named DOS_3 at Aquabus address 3.
Fallback OFF
Set OFF
If Time 20:00 to 20:01 Then DosMix
If Time 20:01 to 20:02 Then DosFeed
If Time 20:02 to 20:03 Then DosFlush
If FeedD 003 Then DosFlush
If FeedD 001 Then DosFeed
If FeedD 000 Then DosMix
Here are the three profiles
ID 30
Name DosMix
Type Dose
Dose Rate 125 mL / min
Pump Direction Reverse
Per Dose Amount 15 mL
Dose Intervals 30 seconds
Dose Count 1
ID 31
Name DosFlush
Type Dose
Dose Rate 125 mL / min
Pump Direction Reverse
Per Dose Amount 60 mL
Dose Intervals 100 seconds
Dose Count1
ID 32
Name DosFeed
Type Dose
Dose Rate 250 mL / min
Pump Direction Forward
Per Dose Amount 15 mL
Dose Intervals 200 seconds
Dose Count 1
It's driving me crazy as to why it's not turning on! If I just use SET ON then it starts, I'm really confused!!
Cheers,
Ali
Bookmarks