ive bought several minidin connectors for a diy breakout box and found all are ponned dfferent pin six is in the wrong spot like connector is mirrored
ive bought several minidin connectors for a diy breakout box and found all are ponned dfferent pin six is in the wrong spot like connector is mirrored
Torx has a DIY thread with the pinout.
https://forum.neptunesystems.com/sho...-Break-Out-Box
You might be an engineer if...You have no life and can prove it mathematically.
yes ive read it but i mean physicaly.
the pin for 5 is to the left and there is a space where pin 5 should be.
looking at connecter face.
have to bend pin over to fit in apex box
Bookmarks