I’m constantly getting alarms for my atk about every hour. How can I reset or clear the alarms that are old? Thanks
I’m constantly getting alarms for my atk about every hour. How can I reset or clear the alarms that are old? Thanks
Copy paste the alarm you are getting.
You might be an engineer if...You have no life and can prove it mathematically.
How do I do that
- - - Updated - - -
How do I get the pics on here
Alarms I’m getting
Can anyone help on this matter? These alarms are driving me crazy. This atk is only 1week old
This may not be the only problem, but you have the email outlet set to ON. It should be in AUTO.
You might be an engineer if...You have no life and can prove it mathematically.
Error messages!!!! How can I fix this. Thanks
If Error messages mean that the ATK ran for more than 5 minutes. Make sure all your optical sensors are functioning properly, that your reservoir is not empty, and that your float is correctly positioned.
The switch message means that the water level is above the high optical sensor, it's dirty and needs to be cleaned, or it isn't seated well in the FMM and needs to be reseated.
You might be an engineer if...You have no life and can prove it mathematically.
How do I reseat the sensors? Sorry I’m not very good with this apex
- - - Updated - - -
The sensors are clean
You unplug them and plug them back in, making sure they go in all the way.
You might be an engineer if...You have no life and can prove it mathematically.
Ok. I cleaned everything up. Reseated all plugs etc. and redid the program through tasks. Let’s hope for the best.
Bookmarks