VDM V1/V2 V3/V4 ports flashing

[l0nemonk]

I am trying to connect my Kessil 380 and the light keeps flashing. I look at the VDM and the status light is good (green) but the speed ports are flashing on and off and the Kessil follows the pattern. The module says fine and I already updated the module. Any idea what the problem is?

Thanks

[RussM]

It sounds like the default programming is still in place. If the flashing is 2 seconds OFF/1 second ON, then that default programming is still there. Have you programmed the applicable VarSpd output?

[l0nemonk]

2 things I did wrong First I using Var 1 instead of Var 3 for the VDM so instead my programming was for the Apex base instead of the VDM, Second I didn't update the program to the Apex . Thank you Russ