I have the following program running for an outlet on a eb8, the input (rodi) comes from a pressure switch connected to a pm2. all this was working on the old classic base station. but this outlet remains off no matter what the pressure switch inputs.
outlet Water:
"fallback OFF
If RODI CLOSED Then ON
If RODI OPEN Then OFF"
i have confirmed the switches are working. I do have another outlet, same eb8, same pm2 inputs, also not responding, but a third working just fine?
also not working outlet saltfill: "Fallback OFF
If Sltmt OPEN Then on
If SltFul CLOSED Then OFF"
but working just fine outlet mixingpumps: "Fallback OFF
Set ON
If Sltmt OPEN Then OFF"
Bookmarks