apex 2016 see it only has 1 PH connection what do i need for running 2 PH probes just got myself a calcium reactor
apex 2016 see it only has 1 PH connection what do i need for running 2 PH probes just got myself a calcium reactor
Go to the Inputs page in either Apex Local or Apex Fusion. Select then enable pH2 to change the 2nd BNC port from the default of ORP mode to pH mode.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
You can actually use the ORP connection for a second pH probe. You just have to change to setting on the ORP tile. Second option would be a PM1.
Sent from my iPhone using Tapatalk Pro
Miracles in Glass Custom 170 (220G), Building a Obsession Custom Sump, Vectra L1, AI Hydra26's, Geo618, Masterflex pump, Apex
I see ok it is nice to have ORP would you keep ORP and buy the PM1
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I personally would rather have the ORP just for making sure that something isn’t going wrong. A lot of people say it’s useless but over the years of having one it’s a lot easier to spot problem happening. I’d just get a PM1
Sent from my iPhone using Tapatalk Pro
Miracles in Glass Custom 170 (220G), Building a Obsession Custom Sump, Vectra L1, AI Hydra26's, Geo618, Masterflex pump, Apex
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks for the imfo ill get a PM1
Bookmarks