I have three xr15 gen 4 pro leds on my tank.the lights are 12 inches above water and at 15 inches below water at 50% intensity at 14k i get a par reading of 51 max this seems very low in my meter not set up right,i don't get why the par is so low.
I have three xr15 gen 4 pro leds on my tank.the lights are 12 inches above water and at 15 inches below water at 50% intensity at 14k i get a par reading of 51 max this seems very low in my meter not set up right,i don't get why the par is so low.
I used this caculator when I received my PMK to see how close it was and mine was very close, maybe at most 20 off.
http://www.aquaticlog.com/radion
You should be at approx 110, if everything is at 50% is there a shadow overhte light sensor. When you turn down your lights does it read 0?
meter reads 0 in total darkness,with meter 6 inches under light dry,im getting 527 par max at 100% still seems low,not sure what is going on,and no one from neptune is helping at all.
In total darkness my Par reads 13. I'm using xr15 pro gen3 at 50% and I'm getting around 144 with the wide angle lens. I'm have the sensor installed 14" from the top of the water. For know I'm keeping it like that the sps are not complaining... for now!
Sent from my iPhone using Tapatalk
What was the resolution here ?
Bookmarks