Originally Posted by
Intel339
OK for clarification and help for anyone else who wants to do this. Any for the record, everything is now working as I wanted.
My personal ATK code is the following:
Fallback OFF
Set OFF
If Swx18_1 OPEN Then ON
If Swx18_2 CLOSED Then OFF
When On > 004:00 Then OFF
Defer 000:10 Then ON
Defer 000:04 Then OFF
If pH > 8.40 Then OFF
Min Time 030:00 Then OFF
If Output Skimmer = OFF Then OFF
If Sw2 CLOSED Then OFF
If Output Leak_BasemtR = ON Then OFF
If Output Leak_BasemtL = ON Then OFF
If Swx6_1 CLOSED Then OFF
If Output Water-change = ON Then OFF
If Cond_V < 33.0 Then OFF
If Sw6 CLOSED Then OFF
If Sw1 CLOSED Then OFF
If Output Siphon_Break = ON Then OFF
My Virtual Outlet for the Solenoid is:
Fallback OFF
If Output ATO_Refill = ON Then ON
If Output ATO_Low = ON Then ON
When On > 380:00 Then OFF
If Swx18_3 CLOSED Then OFF
If Swx18_4 CLOSED Then OFF
If Output Leak_BasemtL = ON Then OFF
If Output Leak_BasemtR = ON Then OFF
The ATO low water level virtual outlet (which uses an optical sensor named: Sw4) is called "ATO_Refill" (USED AS THE TRIGGER TO START REFILLING THE TANK). The coding for this virtual outlet is:
Fallback OFF
Set OFF
If Sw4 CLOSED Then ON
If anyone wants to know what each switch is, let me know and ill spend more time typing it out for you in another post.
Bookmarks