G’day
I have a 2016 apex with an FMM and a leak probe installed. It is showing open when dry so my question is what state should they be dry open or closed thanks in advance
Adrian
G’day
I have a 2016 apex with an FMM and a leak probe installed. It is showing open when dry so my question is what state should they be dry open or closed thanks in advance
Adrian
The should be open when dry and closed when wet.
You might be an engineer if...You have no life and can prove it mathematically.
Thanks how would I change this as it’s dry and closed
- - - Updated - - -
Stupid me it’s open and dry thank you
Adrian
If you haven't done so already I would go to the modules page and change them from AUTO detect to LEAK even though it's working. Auto-detect is kinda buggy and can sometimes change the sensor type for no apparent reason.
You might be an engineer if...You have no life and can prove it mathematically.
Bookmarks