I noticed about a 3 weeks ago randomly my equipment would shutoff for a couple minutes then cycle back on. After a little digging I determined that it was because the apex was thinking the main power was interrupted and going into my programmed battery backup mode (no lights, no skimmer, no sump lights, only the basics). However my house power was not being interrupted, so I changed out the power adapter with another and the problems stopped for awhile. Then again, it started up, so I suspected the outlet to be faulty, so I plugged the adapter into the ups to guarantee no power outages. Yet the problem persists. I visually inspected the apex connector and it looks good. Does anyone know of any other ideas? Does anyone know if you can log the aux power supply input? I believe i'm out of warranty now
Bookmarks