Is it possible to have the Cor connected to the Apex but still be able to use the control box for speed adjustments? I find it's much easier to adjust speed by pressing the button then having to go to the phone and then into Fusion
Is it possible to have the Cor connected to the Apex but still be able to use the control box for speed adjustments? I find it's much easier to adjust speed by pressing the button then having to go to the phone and then into Fusion
When a COR-20 is under Apex control, the buttons allow you to do two things: turn the pump off, and activate Feed cycle A. Speed cannot be adjusted using the buttons.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
What are you trying to do with the speed adjustments? If you want to do everything manually, there's really not much point in having it hooked up to the Apex (or for buying a COR vs another pump)
As Russ said, the right button activates Feed Mode A. you can program the pump to go to whatever speed you want for FeedA. You can also program the pump to change speeds for other events (such as a switch connected to the breakout box)
Bookmarks