I recently added an Ecotech Battery backup to my system. I currently have my MP10 set to turn off during feed modes, but now that I've added the battery backup, the MP10 will no longer turn off because the battery backup kicks in and keeps it running.
I'd like the battery backup to kick on and keep the MP10 operating in the event of a power failure, but I do not want the battery backup to kick on and keep the Vortech operating during Feed modes.
The power supply for the battery backup is connected directly to the wall. The power supply for my Vortech MP10 is connected to the EB8.
The code for the MP10 is as follows:
Vortech_3_8
Control Type: Advanced
1| Fallback ON
2| Set ON
3| If FeedA 010 Then OFF
4| If FeedC 010 Then OFF
5| If FeedD 030 Then OFF
6| If Outlet v-feed = ON Then OFF
7| Defer 005:00 Then ON
The virtual outlet for the MP10 is Vortech_4_1, but all that controls is the daily schedule for pump modes and speeds. "Outlet v-feed" is the virtual outlet for the Neptune AFS I use when I'm away front the house for a few days.
Is there anyway I can modify the code to make it work as desired?
Please pardon me if this has been answered elsewhere, but my search has revealed little a very small number of topics related to this but no example code. Thank you in advance for any help you can provide.
Bookmarks