Results 1 to 7 of 7

Thread: Program outlet for flush help

  1. #1
    Frequent Visitor
    Join Date
    May 2013
    Location
    wisconsin
    Posts
    131

    Program outlet for flush help

    Can you check my program please. What I need it to do is to turn on with my 2 dose programs and stay on for a minute then turning back off.

    Set OFF
    If outlet auto_feeder = on then on
    If coral _feed = on then on
    Defer 001:00 then off


    Sent from my SM-N950U using Tapatalk

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    That will work if they are outlet controlled. If they are neptune DOS, then that will only work if you used profiles instead of the wizard.

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    Frequent Visitor
    Join Date
    May 2013
    Location
    wisconsin
    Posts
    131
    My dos are run with a profile. I have the dos program set. It's the standard outlet that needs to turn on with the dos doses and off after a min to flush the lines clear.

    Sent from my SM-N950U using Tapatalk

  4. #4
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Then you can't just use the DOS name. The DOS shows as ON all day long when you use the wizard. The only way around this is to use OSC statements that call out DOS profiles.

    You might be an engineer if...You have no life and can prove it mathematically.

  5. #5
    Frequent Visitor
    Join Date
    May 2013
    Location
    wisconsin
    Posts
    131
    So this program wony wprk for my dos. It is set up as advanced and to use a profile.

    Sent from my SM-N950U using Tapatalk

  6. #6
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    That will work. Note that the flush will happen during that timeframe and for 1 minute following it.

    You might be an engineer if...You have no life and can prove it mathematically.

  7. #7
    Frequent Visitor
    Join Date
    May 2013
    Location
    wisconsin
    Posts
    131
    Thanks

    Sent from my SM-N950U using Tapatalk

Similar Threads

  1. How to program my RO Flush Solenoid to switch off after 10 mins
    By ian14723 in forum Misc Apex Usage & Programming
    Replies: 4
    Last Post: 04-09-2020, 10:28
  2. Program Outlet to Flush RO Unit
    By rinconmike in forum Misc Apex Usage & Programming
    Replies: 1
    Last Post: 02-01-2020, 12:20
  3. Program advice for Solenoids and RODI Flush
    By iammrhappy in forum Misc Apex Usage & Programming
    Replies: 0
    Last Post: 09-06-2016, 22:43
  4. Program advice for Solenoids and RODI Flush
    By iammrhappy in forum A2 Apex/ApexEL and A3 Apex Pro/Apex/Apex Jr
    Replies: 0
    Last Post: 09-06-2016, 22:43
  5. Help! Help with Tunze Flush outlet example
    By theguyonthecouch in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 2
    Last Post: 03-02-2014, 10:53

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •