I have ATK linked to my Apex programmed with all the defaults from the Tasks setup.
Fallback OFFSet OFF
If Swx3_1 OPEN Then ON
If Swx3_2 CLOSED Then OFF
When On > 005:00 Then OFF
Defer 000:10 Then ON
Defer 000:04 Then OFF
Min Time 060:00 Then OFF
It does not not seem to work on auto. If i turn it ON via desktop or mobile app; pmup works.
Ive had this setup for 3 weeks maybe. I can no longer trust it, i get home from work and i have to manually turn it ON to raise the water level.
I think it worked when i first set it up but that was a while back.
Below is a screenshot of the switches when the water level was below all sensors. im sure this is part of the problem. its not seeing its open sometimes.
There has also been times that both switches are open and the pump didn't "auto" turn ON. The water level was so low, im sure its not from the hour cool down.
Ive unplugged the FMM to reset it which was said to clear the program to rule out if a 60:00 timer was running.
ATK_noauto.png
/vent (disregard)
Getting super frustrated with these products. Just got back into the hobby from a 10 year hiatus. Was excited to see products that would do everything we've always wanted. Bought all product brand new at full price just to have my salinity/conductivity sensor never been able to calibrate. 2 tires with purchasing new calibration solution; has never worked. Now a $200 ATO that doesn't work after being boasted the most reliable. I Also have a DOS which i have no hooked up because im scared to use it with all my other issues.
Bookmarks