Hello all..
Programming:
Fallback OFF
Set OFF
If Swx10_1 OPEN Then ON
If Swx10_2 CLOSED Then OFF
If Power Apex Off 005 Then OFF
When On > 015:00 Then OFF
Defer 000:15 Then ON
Defer 000:15 Then OFF
Min Time 060:00 Then OFF
Setup and Concern:
My setup is a little different.. I have the ATK set up in a 50g stock tank which means there is a large surface area and a lot gets pumped at once each hour the sensor is triggered.
I started logging and I'm getting the ATK turning on every hour to every few hours for 3 min.
The problem is, the ATK switches itself from AUTO to OFF on the dashboard and the Swx10_1 is open but the unit not running.
Any ideas? Thanks!
Sent from my SAMSUNG-SM-G930A using Tapatalk
Bookmarks