I don't know what's cuaseing it it seems to be a software issue but maybe I messed up on the code.
Every couple of days the 2nd sensor gets stuck in the closed position make it think my ato is full and it won't top off water any more so the sump drops low and i manually have to turn it back on to get it to start working again.
All firmware is up to date and I have checked everything else including resetting the Apex only thing I can think of is maybe it's a code or a software bug.
This is my code:
Fallback OFF
Set OFF
If Swx5_1 OPEN Then ON
If Swx5_2 CLOSED Then OFF
If Swx5_3 CLOSED Then OFF
When On > 000:30 Then OFF
Defer 000:20 Then ON
Defer 000:04 Then OFF
Min Time 060:00 Then OFF
If Output Return_O2 = OFF Then OFF
If FeedA 007 Then OFF
If FeedB 017 Then OFF
If FeedC 027 Then OFF
If FeedD 002 Then OFF
Sent from my SM-N950U using Tapatalk
Bookmarks