Results 1 to 3 of 3

Thread: Attaching Ecotech MP10 via WXM module

  1. #1
    Regular Vistor
    Join Date
    Jul 2016
    Location
    London, UK
    Posts
    27

    Attaching Ecotech MP10 via WXM module

    Hello

    As the title, am trying to attach 2 no. MP10 pumps via WXM following Instructions on Neptune web site.
    Am stuck on the following section


    1. 6) Press and hold the Set button (about 10 seconds) on the WWD until theLED flashes white/blue rapidly and the update process will begin. Theupdate process can take up to 6 minutes.

      The light only flashes blue/red rapidly?
      Something obvious I am missing?
      WWD has been updated.

      Hoping somebody can assist please




  2. #2
    New User
    Join Date
    Nov 2017
    Location
    California Pacific Standard Time
    Posts
    1
    Are the MP10s wireless? If not, that’s the problem.

  3. #3
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,463
    Quote Originally Posted by redseareg View Post
    6) Press and hold the Set button (about 10 seconds) on the WWD until the LED flashes white/blue rapidly and the update process will begin. The update process can take up to 6 minutes.
    This is not the attach AKA pairing procedure -- it is the procedure for updating old Vortech firmware. Unless your Vortech is quite a few years old, you do not even need to do this. Another possibility is that you are trying to update a ES (EcoSmart driver) with the old WWD firmware, which will fail, just as if you attempt to update a WWD with ES firmware.

    Skip the WWD or ES firmware update sections, and go to the CONFIGURING THE WXM section in the manual then try attaching/pairing the pump. Or, just follow the Get Started Guide, which does not even cover the Vortech firmware update because it is so seldom actually needed.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

Similar Threads

  1. Help! Attaching Vortech to WXM module problem
    By necco in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 0
    Last Post: 07-14-2020, 17:08
  2. Help! Attaching MP40qd to WXM module fails every time :(
    By Greenjeans in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 7
    Last Post: 04-10-2020, 22:44
  3. Help! Vortec MP10 Programming with WXM Module
    By metteerj in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 8
    Last Post: 03-19-2020, 10:57
  4. Help setting up MP10's with the WXM module
    By MIReefer in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 4
    Last Post: 05-17-2017, 04:45
  5. Help! WXM module and MP10's turning off
    By bescher in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 0
    Last Post: 12-22-2016, 13:19

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •