So I think I want my AFS to feed at 5:00 everyday while I am away on vacation, but I don't want anything else to turn off during this time because I don't want to take any risks of thing going on and off while I am away.
Currently I have an AFS outlet and a VFEED outlet setup that feeds and shuts off the skimmer, COR-20 to 4% and WAV's as well. I just want everything to stay on and want my AFS to feed at 5:00. Would i just need to take out these two lines from the COR-20 and WAV's?
If FeedA 005 Then 1
If Output vFeed = ON Then 1
Here are the outlet codes:
AFS OUTLET
Named AFS_FEEDER and the code is:
Set OFF
If Output vFeed = ON Then ON
Defer 000:45 Then ON
VFEED
Set OFF
If Time 17:00 to 17:07 Then ON
If FeedA 000 Then ON
Skimmer code looks like thisi dont think I have to change this at all)
Fallback ON
Set ON
If Output COR-20 Speed < 90 Then OFF
If Power Apex Off 001 Then OFF
Defer 010:00 Then ON
COR-20 Code looks like thisI think i need to delete the last two lines correct?)
Fallback ON
tdata 00:00:00,0,0,100,0,0,0,0,0,0,0,0,0,0
tdata 23:50:00,0,0,100,0,0,0,0,0,0,0,0,0,0
If FeedA 005 Then 1
If Output vFeed = ON Then 1
WAV's look like this: (I think I need to delete these two lines right?)
If Output vFeed = ON Then WAV_FEED
If FeedA 005 Then WAV_FEED
Am I missing anything?
Bookmarks