Results 1 to 3 of 3

Thread: Apogee SQ-520 on PMK

  1. #1
    Frag Fool
    Join Date
    Aug 2016
    Location
    St Augustine, FL
    Posts
    2

    Apogee SQ-520 on PMK

    Does anyone know if the PMK will work with the Apogee SQ-520?

  2. #2
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    17,674
    It will not work; the SQ-520 has a USB interface and is intended to be connected to a Windows or Mac computer. It cannot be connected to an Apex system at all.
    I'm not a Neptune support rep. Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  3. #3
    Frag Fool
    Join Date
    Aug 2016
    Location
    St Augustine, FL
    Posts
    2
    That's unfortunate. I was about to pull the PMK sensor cable apart and see if the pinout is compatible with the SQ-520 or if I could build an adapter - I may do so anyway. I see Apogee has a range of adapter for different devices so perhaps a call to them might be appropriate. The sensors are pretty much the same with the exception of resolution. The 520 @ 389/692 vrs the 210 @ 410/655 and poor response to red and blue LEDs. No idea why Neptune hasn't simply built the correction factors into logging as the webservice is called.

    At any rate, thank you for your response.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •