I'm having a bit of trouble completing my feed cycle to include return pump ramp up. Any help is appreciated! Currently when I hit the feed A it ramps the pump down to a minimum and waits for 5 mins. After that time the pump kick starts back on to my time set profile blowing bubbles everywhere instead of Pump_Fd_Up (ramp up prof) first. I know I'm missing something but cant put my finger on it. Any other pointers??
Output Config Device base_Var1:
Name: Pump_Speed
Fallback ON
Set Pump_Fd_Up Type:Ramp Time:1 Start:13 End: 50
If Time 08:00 to 08:01 Then Pump_Nt_Up Type:Ramp Time:1 Start:50 End: 70
If Time 08:01 to 22:00 Then Pump_Pulse Type: Pump Init off:0 On:60 Off:60 Min:50 Max:90
If Time 22:00 to 22:01 Then Pump_Nt_Dn Type:Ramp Time:1 Start:70 End: 50
If Time 22:01 to 08:00 Then Pump_Nigh Type:Ramp Time:1 Start:50 End: 50
If FeedA 005 Then Pump_Fd_Dn Type:Ramp Time:1 Start:90 End: 13
Bookmarks