I am completely lost with this pump. I connected to it to apex 2016 with gyre cable. Here is what i have for coding:
physical port:
Rtn_pump_3_6
Fallback ON
Set ON
Variable Output 1 on the Apex Base Unit.:
Varios_pump
Fallback ON
tdata 00:00:00,0,0,30,0,0,0,0,0,0,0,0,0,0
tdata 23:59:00,0,0,30,0,0,0,0,0,0,0,0,0,0
I set it up using the graph. I have it set to 30% all the time. So If i want to make it 40 % or even 100% and port is set to auto it does nothing but if I put the port to "ON" it drains my water from the return chamber. I am not able to increase the flow of the pump. the controller does not work as it is being controlled by apex. don't want anything fancy, just want to manage the pump via apex and increase decrease flow as needed. any suggestions? I can scratch all this and start over.
so the physical port on the eb8 just sets to on and fallback on..So all the programming is on the V port?
Bookmarks