I am setting up Apex VSP 1 and 2 on the base unit to control LEDs. When running the VSP preview one outlet on my EB8 (outlet 3) turns off and on. Was not aware this was possible.
I had a cat5 cable hooked up to the VSP and was using a multimeter to test the output DC voltage. The VPS ramps correctly but turns off the EB8 outlets and then back on.
VSP Config I was using was basic just testing the ramping:
Outlet in question:Code:Fallback OFFtdata 00:00:00,0,0,0,0,0,0,0,0,0,0,0,0,0 tdata 12:00:00,0,0,100,0,0,0,0,0,0,0,0,0,0 tdata 23:59:00,0,0,0,0,0,0,0,0,0,0,0,0,0
Screen Shot 2018-03-12 at 10.23.42 PM.jpg
Any suggestions?
Bookmarks