Results 1 to 4 of 4

Thread: Dosing stops

  1. #1
    Regular Vistor
    Join Date
    Sep 2016
    Location
    Indianapolis, IN
    Posts
    34

    Dosing stops

    Hello,

    Outlet:

    Fallback OFF
    Set OFF
    If Time 00:00 to 22:30 Then Alkalinity
    If pH > 8.40 Then OFF

    Profile:

    Dose Rate: 7mL/min
    Dose Amount: 1mL
    Dose Interval(s): 3600
    Number of Doses: 20

    I have another outlet for Calcium same settings using Calcium profile.

    Both are set to run 20 times, but each ran 10 times.

    Using a DDR

    Please advise.

    Thank you,

    Don

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Was your pH above 8.4?

    Regardless, I would not reccomend this approach. You are much better off using the wizard and just tell it how much you want for the day over whatever time interval you want.

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    Regular Vistor
    Join Date
    Sep 2016
    Location
    Indianapolis, IN
    Posts
    34
    Never mind, I did not look at the log correctly. Thanks.

  4. #4
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,463
    zombie makes a good point; using profiles for a basic dosing regimen is doing it the hard way. It's much easier to use the DŌS wizard in Apex Fusion.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

Similar Threads

  1. PMUP stops after 5 seconds
    By rpattek in forum Fluid Monitoring Module (FMM), FMK, ATK, LDK, and FMM Accessories
    Replies: 3
    Last Post: 03-15-2021, 11:26
  2. Help! Salinity probe programming to make sure dosing stops if ppt is different.
    By martynflowers79 in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 0
    Last Post: 06-05-2019, 08:53
  3. One Snail Stops Both Wavs
    By bigjim in forum WAV Powerheads
    Replies: 6
    Last Post: 07-13-2018, 09:13
  4. Pipeline completely stops
    By Tuffloud1 in forum WAV Powerheads
    Replies: 3
    Last Post: 02-25-2016, 22:17
  5. Apex stops working
    By Eric in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 1
    Last Post: 10-01-2015, 09:12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •