Results 1 to 3 of 3

Thread: Gyre 150/130 IceCap Interface Modules

  1. #1
    Frequent Visitor
    Join Date
    Nov 2016
    Location
    US, Pacific Time
    Posts
    83

    Gyre 150/130 IceCap Interface Modules

    Hello. I connected a Gyre 130 and 150 to 130 and 150 Icecap interface modules and used a Y cable to connect both to the 2016 Apex controller Variable Speed Port 1/2. I'm noticing that my 150 is only pulling 20 watts at 100%, whereas it use to run 31 on the OCE Gyre controller. Any ideas?

    Are there any limitations to connecting a 130 and 150?

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    If you plug in the old controller without the gyre connected, how many watts does that pull? If you have a multimeter, what is the voltage on the cable?

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    Frequent Visitor
    Join Date
    Nov 2016
    Location
    US, Pacific Time
    Posts
    83
    Hello. Great idea. The OCE controller without the powerhead attached runs at 5w. The IceCap Module without the powerhead runs at 4w. I don't have a multimeter handy.

Similar Threads

  1. Help! Icecap Gyre 1K/Interface Module
    By ccombs in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 3
    Last Post: 03-18-2019, 15:34
  2. IceCap Gyre Interface
    By Spdjnky in forum Misc Apex Usage & Programming
    Replies: 29
    Last Post: 01-01-2019, 15:17
  3. 2 Gyre 150 Icecap Alternating Pulse
    By lindersen in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 3
    Last Post: 01-25-2017, 19:32
  4. Help with Gyre 150 pumps and modules
    By bobfish in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 0
    Last Post: 03-11-2016, 08:41
  5. Icecap Gyre interface module
    By c5thomas in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 4
    Last Post: 02-13-2016, 18:35

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •