Results 1 to 3 of 3

Thread: Apex and wave makers

  1. #1
    New User
    Join Date
    Apr 2018
    Location
    New Orleans
    Posts
    2

    Apex and wave makers

    Im in need some assistance for my codes. The following code I have for my maxspect xf250 with advance controller.
    Fallback on
    Set on
    If feed a 005 then off( manual feed)
    If feed b 045 then off(maintenance)
    If time 10:30 to 10:35 then off
    If time 13:30 to 13:35 then off
    I have an auto feeder to feed the tank at 10:30 and 13:30 everyday and want to turn off wavemakers and let the return move the pellets food I feed. The wavemakers turn off at the time above but doesn’t turn back on. Can somebody help me out with the codes.
    I also tried this code and it doesn’t come back on after the 1030 to 1034 slot.
    Fallback on
    Set on
    If time 00:00 to 10:29 then on
    If time 10:30 to 10:34 then off
    If time 10:35 to 13:29 then on
    If time 13:30 to 13:34 then off
    If time 13:35 to 24:00 then on

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Your code is fine, but it will be off for 6 minutes not 5 because of the way if time statements work.

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    New User
    Join Date
    Apr 2018
    Location
    New Orleans
    Posts
    2
    Okay but how come it don’t want to kick back on

Similar Threads

  1. Both wave makers on variable speed port stopped working
    By Polarcollision in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 1
    Last Post: 09-29-2019, 13:46
  2. Help! Jebao to Apex Programming - Issues with wave makers not following program
    By Digh0621 in forum Misc Apex Usage & Programming
    Replies: 10
    Last Post: 06-20-2016, 13:02
  3. Wave modes when not connected to Apex
    By oseymour in forum WAV Powerheads
    Replies: 1
    Last Post: 03-26-2016, 06:47
  4. Can anyone tell me why my wave makers are goin whonky??
    By GREEF stricken in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 7
    Last Post: 12-23-2015, 09:10
  5. Programming wave makers
    By TDB in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 6
    Last Post: 03-21-2015, 17:55

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •