I have used the Neptune Tunze cable to connect my two Tunze 6095 streams to the variable port on the Apex and all works really well. However I tested pulling the aquabus cable out of the Apex so the Apex lost power but the power bar still had mains power. I did this to replicate having an issue with the Apex and fully expected the Streams to carry on working, just not controllable. To my surprise they just stopped dead. Am I doing something wrong or is it not possible to keep the Streams spinning if the Apex is dead.
Here is the code i have on the Streams
Fallback ON
tdata 00:00:00,0,0,33,0,0,0,0,0,0,0,0,0,0
tdata 23:59:00,0,0,33,0,0,0,0,0,0,0,0,0,0
If Time 08:30 to 09:59 Then PulseCalm
If Time 10:00 to 17:29 Then Pulse
If Time 17:30 to 18:59 Then PulseCalm
If FeedA 000 Then OFF
Bookmarks