Is there any way to restart fusion without the control head? I woke up to power out and when it came back on the control head was not on. The Apex is still performing functions but Fusion needs to be rebooted.
Is there any way to restart fusion without the control head? I woke up to power out and when it came back on the control head was not on. The Apex is still performing functions but Fusion needs to be rebooted.
You cannot reboot APEX Fusion; it is a web site out there on the Internet. You can restart the Apex base unit itself through the Classic Dashboard or by briefly removing all power to the Apex base unit - disconnect the Aquabus cable(s) from the base unit, and if you have one, also disconnect the 12VDV adapter. However, that probably will not help with a display which is blank. Unplug the display module cable for a few seconds; that may bring the display back to life. If that does not do the trick, see this sticky: https://forum.neptunesystems.com/sho...creen-is-blank
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Bookmarks