Hi...I upgraded my Apex Classic to the latest version, and the modules are all up to date, but it’s been catastrophic. I can no longer under any circumstances control my 8 radions with my WXM.
The radions all have the same configuration, which I post below: basically just applying profiles at different times during the day to ramp lights up and down. None of that has changed, and worked perfectly prior to this. The profiles themselves are fairly standard, defining color values and ramp times.
The symptoms are very odd. I can manually turn the lights on and they go full blast on white. I can turn them off as well. But they won’t take the profiles, except when I throw the switch that applies the “Display” profile. That sets them to the profile, but I can’t get them off it: turning off the switch doesn’t revert to the current time profile as it used to.
Needless to say this is pretty distressing. I’ve troubleshot this for 3 solid days to no avail. I’m wondering if anyone else has experienced this, and if so how it was fixed.
The config for the lights:
Fallback ON
If Time 07:00 to 08:30 Then CLABRampUp1
If Time 08:30 to 10:00 Then 20KRampUp
If Time 10:00 to 19:00 Then 20KDay
If Time 19:00 to 20:30 Then 20KRampDown
If Time 20:30 to 22:00 Then CLABRampDn2
If Time 22:00 to 07:00 Then Moonlight
If Output Set10K = ON Then 10KDay
If Output DisplayLight = ON Then Display
Bookmarks