Results 1 to 2 of 2

Thread: DOS help

  1. #1
    Regular Vistor
    Join Date
    Sep 2013
    Location
    Clio Michigan
    Posts
    43

    DOS help

    my is programmed to send alarm if levels low
    My problem is
    1 sets off alarm
    2 sends email

    However fusion doesn’t show levels low
    Or that emails are on or DOS alarm is on

    The alarms send notice on,
    and that alarm is off within 30 seconds

    2018-04-25 09:17:17 -0400ONIf Output DDR_Low = ON Then ON

    2018-04-25 09:17:22 -0400OFFSet OFF


    Sent from my iPhone using Tapatalk

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    It will help if you add this to your email alarm. These are my preferred defer values.

    Defer 000:30 Then ON
    Defer 000:10 Then OFF


    This might bot eliminate the problem, but it will reduce the frequency at which you get alarms when the level is right on the margin.

    You might be an engineer if...You have no life and can prove it mathematically.

Similar Threads

  1. Question: How to dos using if time and defer on my DOS
    By Nagreen8 in forum Apex Programming for Dosing, ATO, and AWC
    Replies: 4
    Last Post: 11-15-2020, 15:35
  2. Does the DOS have to be above the DOS reservoir and above the water line in the sump?
    By deputydog95 in forum DŌS & DDR – Dosing and Fluid Metering System
    Replies: 16
    Last Post: 12-17-2018, 17:44
  3. When the first DOS is connected to 1LINK, can 2nd DOS be connected to 1st via Aquabus?
    By derekc in forum DŌS & DDR – Dosing and Fluid Metering System
    Replies: 4
    Last Post: 04-17-2018, 10:25
  4. Dos... Program to Dos later at night???
    By DarthSimon in forum DŌS & DDR – Dosing and Fluid Metering System
    Replies: 1
    Last Post: 08-17-2017, 11:45

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •