Hi,
I use 2 SV-1 connected to my RODI (the exit line has a T connection dividing the water flow to 2 fresh water tanks, the SV-1 are in parallel).
The first is plugged to FMM and the second to 1-LINK.
Both modules switch on and off (I can hear the switch), depending on time and water-level sensors.
My problem is that both SV-1 are still flowing when switch is off (the flow is smaller but still significant).
Both SV-1 are new. Pressure is low.
Any idea ?
Thanks,
Lilian
IMG_5117.jpg
Bookmarks