Shouldn't the return pump shut off with this wizard when feed A is on?
Screen Shot 2018-05-10 at 8.51.41 PM.jpg
Shouldn't the return pump shut off with this wizard when feed A is on?
Screen Shot 2018-05-10 at 8.51.41 PM.jpg
Yes, as long as you uploaded the code and the outlet is in AUTO.
You might be an engineer if...You have no life and can prove it mathematically.
Is this the problem? I have two EB832's. The two show up under modules and only one shows up under outputs?
Screen Shot 2018-05-10 at 9.58.44 PM.jpg
Screen Shot 2018-05-10 at 10.03.04 PM.jpg
I see both under both fields. The 10_X are one EB832 and the 2_X are the other. Make sure it's actually plugged into the outlet you think it is. Turn it to manual ON Then to manual OFF and see which LED changes. Make sure that's where you have it plugged in.
You might be an engineer if...You have no life and can prove it mathematically.
I meant search the forums for vFeed. Here is an example.
https://r.tapatalk.com/shareLink?url...3&share_type=t
You might be an engineer if...You have no life and can prove it mathematically.
Bookmarks