Originally Posted by
ehunforfun
So I've been having some strange issues with my COR 20 lately and it seems to be a power issue.
First my IQ settings are 40% min and 85% max. Then I have a single point on the power graph at 90%.
If I try and raise my IQ max above 85% it starts power cycling the pump, you can hear it ramping up then dropping. Sometimes I will get a VOLT error on fusion sometimes I won't.
Today, it wasn't responding to feed mode requests until I power cycled it (unplugged, then plugged back in). I've had it for about two months and I haven't taken it apart and cleaned it, could that be an issue? Also I noticed the power supply was pretty hot to the touch, I could hold it in my hand but it was definitely hot.
I'm hoping I won't need to send it back as I don't have a backup return pump.
Bookmarks