Results 1 to 3 of 3

Thread: Switch log?

  1. #1
    Frequent Visitor
    Join Date
    Apr 2017
    Location
    Calabasas, California
    Posts
    64

    Switch log?

    How do I find out if a switch from my ALD was tripped sometime today? Is there a log of every time a switch goes on or off?

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    It has to be inside a virtual outlet or email alert in order to log it. Switches do not log by default.

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    Frequent Visitor
    Join Date
    Apr 2017
    Location
    Calabasas, California
    Posts
    64
    I see. How do I find out what is happening with my drain system? twice in the past 3 days, I came home to my tank partially drained. If I look at the log, there are over 400 entries turning the drain on and off in less than a second intervals!. It eventually results in my virtual outlet turning on and I believe causing the tank to drain. the following are the apex codes:

    Drain outlet:
    Fallback OFF
    Set OFF
    If FeedD 000 Then ON
    If Swx8_1 CLOSED Then ON
    If Output LeakDrain = ON Then OFF

    (Swx8_1 is a switch attached to my ALD)

    virtual LeekDrain outlet
    Set OFF
    If Swx8_1 CLOSED Then ON
    Defer 000:30 Then ON

    when Drain is ON, the tank drains

    I cannot tell if the feedD cycle is turning the drain on or the virtual outlet is. Is this from electrical interference?

Similar Threads

  1. programming help: if switch 1 AND switch 2 = on then...
    By jacksonpt in forum Misc Apex Usage & Programming
    Replies: 4
    Last Post: 02-16-2018, 10:16
  2. ATK issue: can't get optical switch 1 to be recognized as optical switch
    By Muttley000 in forum Fluid Monitoring Module (FMM), FMK, ATK, LDK, and FMM Accessories
    Replies: 7
    Last Post: 11-09-2017, 16:11
  3. my ATO "stuck switch" virtual switch doesn't seem to be working?
    By f3honda4me in forum Apex Programming for Dosing, ATO, and AWC
    Replies: 4
    Last Post: 05-17-2017, 05:56
  4. Question: Looking for a log of Switch conditions
    By Kentucky13 in forum APEX Fusion
    Replies: 5
    Last Post: 02-01-2016, 08:13
  5. Can I log sw switch input
    By Claudio D in forum Misc Apex Usage & Programming
    Replies: 2
    Last Post: 01-25-2016, 19:17

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •