This is a tool which makes it easy to unlock the impeller assembly from even the cruddiest, most coralline-encrusted WAV.
Recommended filaments: ABS/ABS+, PETG
Infill: at least 40% is recommended for high strength
Top/bottom/wall thickness: =>2mm
Support: maybe; my Wanhao D6 printers handle the beveled edges without any need for support structure; YMMV
License: CC BY-NC-ND | Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
WAV-top_resize.PNG
WAV-angled_resize.PNG
wavwrench.jpg
To use, slip the tool under the propeller, aligned with one of the locking tabs. Twist counter-clockwise.
Download the STL: WAV_Impeller_Tool.stl
Bookmarks