Originally Posted by
MHG
I would like to program two things and I am hitting a snag on the first one. I wanted to add the line in my skimmer:
(DT_RETURN is the name of my cor)
If Output DT_RETRURN Percent < 95 Then OFF
However I get this error:
Send Failed
//Error: line 3 - Expected ON, OFF, Amps, Watts // if Output DT_Return Percent < 90 then off
I also would like to program my cor when it turns on to start at 50% and slowly ramp up to 95% over about a 5 minute period. My overflow seems to have an issue if it just comes on at full right off the bat. I am thinking I need to use a profile...
Is it a problem with the < symbol on the mac or am I missing something?
Bookmarks