Ok -I am sure I am missing something fundamental here -below is program code for a tunze ATO which I will probably change now that I have a back up sensor but ...with line 3 it keeps giving me an error.
Essentially I have it so that if the other tunze floater fails to respond immediately the optical sensor will essentially turn off the tunze. I will have it so that it will also stop auto water changes too.
Advice appreciated
Thanks
LB
Fallback OFF
Set OFF
If Swx7_1=CLOSED Then OFF
If Time 01:00 to 01:15 Then ON
If Time 03:00 to 03:15 Then ON
If Time 05:00 to 05:15 Then ON
If Time 07:00 to 07:15 Then ON
If Time 16:00 to 16:15 Then ON
If Time 19:00 to 19:15 Then ON
If Time 21:00 to 21:15 Then ON
If Output RetPump_2_3 = OFF Then OFF
Sent from my iPhone using Tapatalk
Bookmarks