Can I control the flow of water from a DC650 jebao pump? I want to control the flow of water from a calcium reactor using the FMM module. Is it possible? How would I do this programming?
Can I control the flow of water from a DC650 jebao pump? I want to control the flow of water from a calcium reactor using the FMM module. Is it possible? How would I do this programming?
I think the dc650 is compatible with the Apex link so you would need that to control the pump. I'll let someone else chime in on the programming
Sent from my SM-G950U using Tapatalk
The dc650 pump is compatible with apex, using the module https://www.fish-street.com/apex__gh...ch_string=apex
My question is about programming. How do I increase or reduce the flow of the pump to keep the flow of the reactor within the range I want (eg between 5 and 7 liters / hour)?
Find the percentage that gives you 7, then if for example you got 50% there, you would want to code something like this
Set 35
If Flow < 7 Then 40
If Flow < 6.5 Then 45
If Flow < 6.0 Then 50
If Flow < 5.5 Then 55
If Flow < 5.0 Then 60
If FeedD 000 Then OFF
Sent from my SM-G965U using Tapatalk
Bookmarks