Hi I’m just setting my new apex 2016 and my temp prob will only read -6.1
i have tried calibrating and using two temp measures to be accurate but nothing.
turned off and on.
tried different settings any ideas please.
Hi I’m just setting my new apex 2016 and my temp prob will only read -6.1
i have tried calibrating and using two temp measures to be accurate but nothing.
turned off and on.
tried different settings any ideas please.
It's either not plugged in all the way or broken.
Sent from my SM-G965U using Tapatalk
You've set the temp probe port to read in Celsius, I presume?
A reading of about -6 (Celsius) or 20-22 (Fahrenheit) almost always indicates that the temp probe is not actually connected. Verify that it inserted in the correct jack, and that the locking tab on the temp probe plug clicks and locks in.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks guys.
100% plugged in all the way does that nice little click sound when plugged in.
im getting a bit dishearten with it to be fair bought one when opened the box the main module was smashed returned to shop and they replaced the module.
so thought would set up and now have this.
Bookmarks