Is the Kessil A80 Blue Apex ready and what do I need to set up one on my Bio cube.
Is the Kessil A80 Blue Apex ready and what do I need to set up one on my Bio cube.
The A80 is ApexReady. But you cannot fully control it directly with your Apex Jr. The Kessils use 0-10 volt control signals, and the Jr itself does not have 0-10v outputs. You will need to add a VDM module, which has four 0-10v outputs. You will also need the proper cable available from Kessil. The Kessil part number is KA360C1.
Without a VDM and the correct cable, you will only be able to control AC power to the light - in other words, you'll be limited to ON/OFF only.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Bookmarks