Hello, I've connected my FMM module and see the two leak detector but can't seem to locate the Solenoid so I can program it. What would be the default name in Fusion?
Hello, I've connected my FMM module and see the two leak detector but can't seem to locate the Solenoid so I can program it. What would be the default name in Fusion?
A solenoid does not show up in Fusion. You need to configure the DC24 output to which the solenoid is connected. See this for more detail:
https://forum.neptunesystems.com/sho...-ACC-Ports-FAQ
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
First look at your list of modules to find what Module address number is assigned to your FMM. Then look at the list of Outputs, find the 24v device starting with that Module address number. For example, my FMM is assigned to address 4. In my list of Outputs, I have a 24v output named FMM_24V assigned as 4_1 under the Device column:
Modules
————
Addr Name Type
——— ——— ——-
2 EB832 EB832
3 WXM WXM
4 FMM FMM
Outputs
————
ID Name Device Type
———- ——— ——— ———
19 FMM_24V 4_1 24v
Bookmarks