Hey Guys,
So I installed a turf scrubber for nutrient export, and it has a half inch barb input. I am using a Jebao 3000 to power it.
The specs of the Jebao are posted below...
So I am using 3/4 inch barb out of the pump then convert to to half inch with a 3/4 to 1/2 barb......
I then installed a 1/2 flow sensor right before the input of the turf scrubber which is half inch.... My flow sensor is properly configured to a half inch FS and is reading 208 GPH..... Is there a limitation on the 1/2 inch flow sensor on GPH??? I have a one inch flow sensor sitting in a box, and know it could accommodate more flow, but my thought is why would I want to know the FR of the water coming out of pump, wouldn't I want the FS50 Installed on the water entering the scrubber with 1/2 ???
Tubing:
https://www.youtube.com/watch?v=qH5G-S0PYwg&feature=youtu.be
Flow Rate in Scrubber:
https://www.youtube.com/watch?v=O7cZ...ature=youtu.be
Thoughts????
Thx in Advance,
Steve
JEBAO DC3000 WATER PUMP:
- - Max Flow: 800GPH (3000L/Hr)
- - Max Head: 3m
- - Power: 25Watt
- - Imput: AC100-240V 50/60HZ
- - Output: 24V
- - High performance motor with innovative electronics and energy savings up to 50%
- - Automatic power-off protection when dry
- - Motor protection when impeller is blocked
- - Super quiet operation
- - 3/4" barb
- - Outlet: 1" MPT, 1/2" - 3/4" - 1" barb
Bookmarks