Originally Posted by
jbatt
Hey all,
Long time Apex user here.....first time on the Neptune forum.
I had a couple of questions i was hoping to get some answers too before pulling the trigger on the wav pumps. Hoping someone here can help.
1. I have a standard 120. Are the pumps going to be too much for that 4' footprint? I have read different answers across the net and just looking for confirmation that the pumps will be alright in the tank. Tanks is SPS dominant.
2. I like running pulse mode. Am I correct in understanding if I run pulse, the pump that is running in slow speed will still push 1800 gph at 1%? Or, is there a way to configure pulse where one pump pulses at say 25% for 2 seconds and the other pump is completely off? The reason I ask is because if one pump pulses at 1800 in slow then the other pump it seems will have to come up to around 3000 gph just to overtake the pumps at 1%.
Thanks so much for any answers and clarification. Hope this thread is will still give alerts to my post. Thanks.
Bookmarks