If you’re a planner, like me, and are on a Mac, you might be keen to plan out (or document) your Apex setup using a tool like OmniGraffle.
After tearing down my tricked out BioCube before moving cross-country, I started planning my next build and found it really helpful to be able to map out the connections and such to make sure I had enough cables, available ports, etc. Here’s my current plan:
Given that I’ve learned so much from others here on the forums, I thought I’d pay it forward and share the stencils I’ve created. It’s not exhaustive, but I have most of the Neptune gear in there:
- 2016 Head Unit,
- ATK
- COR 15 & COR 20,
- DOS,
- DDR,
- EB832,
- FMM,
- PMUP,
- WAV,
- VDM,
- WXM,
- and various color-coded cables, probes, sensors, etc.
All are set up with the right number of magnets for the different cable attachment points (which are also labeled).
If it’s missing something you need, shoot me over the info (look, ports, etc.) and I will add it to the stencil set as I have the time.
Bookmarks