Hi All--
I've edited this post to reflect some attempts to get this right but I'm still not getting it. I've narrowed it down to 5 profiles. Assuming sunrise was 6:19 a.m. and sunset was 6:58 p.m. from my season table. The attachment is a Radion graph that approximates what I'm trying to do.
CoralAM - from sunrise for 3 hours
SPS_PHX14UP - from 3 hours after sunrise/1 hour ramp from 20 - 55%
SPS_PHX14 - four hours after sunrise for approximately 7 hours at 55%
SPS_PHX14DN - ramp down from 55 - 20%
CoralPM - coral viewing for 3 hours
Profiles are as follows
CoralAM
White - 0
Blue - 5
RB - 75
Green - 0
Red - 0
UV - 100
Start Intensity - 1
End Intensity - 20
Ramp Time - 180
SPS_PHX14UP
White - 24
Blue - 100
RB - 100
Green - 17
Red - 30
UV - 100
Start Intensity - 10
End Intensity - 55
Ramp Time - 60
SPS_PHX14
White - 24
Blue - 100
RB - 100
Green - 17
Red - 30
UV - 100
Start Intensity - 55
End Intensity - 55
Ramp Time - 0
SPS_PHX14DN
White - 24
Blue - 100
RB - 100
Green - 17
Red - 30
UV - 100
Start Intensity - 55
End Intensity - 20
Ramp Time - 60
CoralPM
White - 0
Blue - 5
RB - 75
Green - 0
Red - 0
UV - 100
Start Intensity - 20
End Intensity - 1
Ramp Time - 360
Radion Program
Fallback OFF
Set OFF
If Output Moonlight = ON Then Moonlight
If Sun 000/-360 Then CoralAM
If Sun 180/-360 Then SPS_PHX14UP
If Sun 360/-060 Then SPS_PHX14DN
If Sun 360/000 Then CoralPM
If Sun 240/-120 Then SPS_PHX14
If Output CoralView = ON Then CoralView
The mid day (SPS_PHX14) seems to be working but the program goes into CoralPM and shuts down way before sunset. Please review my profiles and program and let me know if there are any recommendations.
Thanks
Bookmarks