Results 1 to 1 of 1

Thread: Question on Season Table Lighting

  1. #1
    Regular Vistor
    Join Date
    Dec 2014
    Location
    Atlanta, GA
    Posts
    31

    Question Question on Season Table Lighting

    Hi All--

    I've edited this post to reflect some attempts to get this right but I'm still not getting it. I've narrowed it down to 5 profiles. Assuming sunrise was 6:19 a.m. and sunset was 6:58 p.m. from my season table. The attachment is a Radion graph that approximates what I'm trying to do.

    CoralAM - from sunrise for 3 hours
    SPS_PHX14UP - from 3 hours after sunrise/1 hour ramp from 20 - 55%
    SPS_PHX14 - four hours after sunrise for approximately 7 hours at 55%
    SPS_PHX14DN - ramp down from 55 - 20%
    CoralPM - coral viewing for 3 hours

    Profiles are as follows

    CoralAM
    White - 0
    Blue - 5
    RB - 75
    Green - 0
    Red - 0
    UV - 100
    Start Intensity - 1
    End Intensity - 20
    Ramp Time - 180

    SPS_PHX14UP
    White - 24
    Blue - 100
    RB - 100
    Green - 17
    Red - 30
    UV - 100
    Start Intensity - 10
    End Intensity - 55
    Ramp Time - 60

    SPS_PHX14

    White - 24
    Blue - 100
    RB - 100
    Green - 17
    Red - 30
    UV - 100
    Start Intensity - 55
    End Intensity - 55
    Ramp Time - 0

    SPS_PHX14DN

    White - 24
    Blue - 100
    RB - 100
    Green - 17
    Red - 30
    UV - 100
    Start Intensity - 55
    End Intensity - 20
    Ramp Time - 60

    CoralPM
    White - 0
    Blue - 5
    RB - 75
    Green - 0
    Red - 0
    UV - 100
    Start Intensity - 20
    End Intensity - 1
    Ramp Time - 360

    Radion Program
    Fallback OFF
    Set OFF
    If Output Moonlight = ON Then Moonlight
    If Sun 000/-360 Then CoralAM
    If Sun 180/-360 Then SPS_PHX14UP
    If Sun 360/-060 Then SPS_PHX14DN
    If Sun 360/000 Then CoralPM
    If Sun 240/-120 Then SPS_PHX14
    If Output CoralView = ON Then CoralView

    The mid day (SPS_PHX14) seems to be working but the program goes into CoralPM and shuts down way before sunset. Please review my profiles and program and let me know if there are any recommendations.

    Thanks
    Attached Images Attached Images

Similar Threads

  1. Review My Program Season Table Lighting Difficulties
    By watkinsmd in forum Apex Programming for Lighting
    Replies: 2
    Last Post: 08-05-2018, 07:06
  2. Question: Global intensity setting on Season Table for lighting?
    By Etoimos in forum Apex Programming for Lighting
    Replies: 6
    Last Post: 07-12-2017, 14:19
  3. Question: Lighting gap when using season table AI SOLs
    By lkoechle in forum Apex Programming for Lighting
    Replies: 2
    Last Post: 04-05-2015, 04:58
  4. Using season table for lighting question...
    By qpurser in forum Apex Programming for Lighting
    Replies: 1
    Last Post: 02-16-2014, 17:43
  5. Can not get season table to work with AI Sol lighting
    By Kenpau in forum Apex Programming for Lighting
    Replies: 7
    Last Post: 01-13-2014, 06:18

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •