Receiving the following error messages a couple times a day...
Date: 2018-07-28 16:08:14 -0700
Status: ON
Statement: If Error COR-20 Then ON
Date: 2018-07-28 16:09:04 -0700
Status: OFF
Statement: Set OFF
The Cor-20's temp & flow all look good...Ideas??
Background:
Power consumption had been running about 75w and now is running about 85w with more significant variation, the flow meter shows a corresponding variation ...
This pump runs continuously driving a closed loop circ path, with a 100% peek power 9 to 9 with a tapper up/down to 1%, peek flow varies from 1450 to 1550 wit low flow around 1250 gph.
Bookmarks