Results 1 to 3 of 3

Thread: Dos aquabus address

  1. #1
    Frequent Visitor
    Join Date
    Oct 2017
    Location
    Boston, Massachusetts
    Posts
    61

    Dos aquabus address

    Hi I had set up my DOS for AWC and it was connected to my EB832. I needed to move my EB832 but keep the DOS where it is located in my basement. I used a 1 LINK module and connected it to they EB832 via an aquabus cable. I powered it with its brick and then connected my DOS via a its 1 link cable to the 1 link module.

    It seems to be working properly but the address in fusion still states is at the AquaBus address of the EB832 instead of the 1 link...am I missing something?

  2. #2
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    17,427
    The DOS has its own Aquabus address. It does not use the address of the module it is connected to.
    I'm not a Neptune support rep. Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  3. #3
    Frequent Visitor
    Join Date
    Oct 2017
    Location
    Boston, Massachusetts
    Posts
    61
    ah..missed that ok.
    Thanks for your help!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •