I thought I had saved an earlier post from someone else but I can’t find it.
Anyways, I purchased an EB832 to replace an extra older EB8. How do I copy over the programmed outlets to the new one?
TIA
I thought I had saved an earlier post from someone else but I can’t find it.
Anyways, I purchased an EB832 to replace an extra older EB8. How do I copy over the programmed outlets to the new one?
TIA
This is the procedure I would do.
1. Add an extra character to the outlet names of all your current EB8 outlets. Something like a -, 0, etc that you don't use in other outlet names will help so you can search for it easier.
2. Name the new EB832 outlets to match what the old outlets were named before adding the extra character.
3. Search your config summary for any cases the old outlets were referenced and then remove the extra character you added in those references so they point to the new outlets
4. Copy paste the programming from the old outlets to the new outlets.
5. Physically move the cords from the old outlets to the new outlets
6. Remove the old EB8 from the system or rename the old outlets how you wish and change their code to always ON or always OFF.
Sent from my SM-G965U using Tapatalk
I’ll give that a shot.
Thanks
Bookmarks