Results 1 to 3 of 3

Thread: How to turn radion off if heat high?

  1. #1
    New User
    Join Date
    Apr 2018
    Location
    Seattle, Wa
    Posts
    10

    How to turn radion off if heat high?

    My Radion is already controlled via Apex, but I have the outlet set to always on, so there isnít a way to have it turn off if the temp gets too high. Hot days making me nervous. I know how to set it to go off based on temp, but there are only options for on time and off time whe you program the outlet as a light. I need it always on, unless itís too hot. Help please?

  2. #2
    Frequent Visitor
    Join Date
    Feb 2018
    Location
    Portland, OR
    Posts
    116
    Are you controlling the Radion program with a WXM module? If so, then just go into the Advanced tab for the Radion and set a temperature threshold to turn it off:

    If Tmp > 82 Then OFF

    You shouldn't need to change any settings on the energybar outlet itself. In fact, it's recommended to plug the Radion power into a normal power strip instead of wasting a programmable outlet. Again, this assumes you're using WXM.

  3. #3
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    11,091
    Quote Originally Posted by SuncrestReef View Post
    Are you controlling the Radion program with a WXM module? If so, then just go into the Advanced tab for the Radion and set a temperature threshold to turn it off:

    If Tmp > 82 Then OFF

    You shouldn't need to change any settings on the energybar outlet itself. In fact, it's recommended to plug the Radion power into a normal power strip instead of wasting a programmable outlet. Again, this assumes you're using WXM.
    That can cause the light to flicker on and off rapidly if temp is near the setpoint. A better way is to do this

    VO will dim at high but not dangerous temps and turn off completely at dangerous temps. Set profile dim to desired spectrum and lower than normal intensity like maybe 25% or so. Set the time statement to hours intensity would normally be above the dimming intensity.

    DimLights
    If Temp > 81.1 Then ON
    If Temp < 81.0 Then OFF
    If Time 20:00 to 10:59 Then OFF


    Radion Advanced Tab
    If Output DimLights = ON Then Dim
    If Temp > 82.0 Then OFF
    Min Time 010:00 Then OFF





    Sent from my SM-G965U using Tapatalk

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •